Makerspace project

For my makerspace project I help John with rock pit he was building for lower school. First we got help from doc to cut the wood. We had a blueprint already made so that made cutting the wood easier. Then we dugout the area where we were going to put it. Then we brought all the wood outside and started the building the frame for the rock pit. We ran into one problem while putting the frame together. That was one of corner pieces was cut to short so the screw would just go right through the piece wood. So we had to recut that piece of wood which slowed us down a little bit. Then we continued building it the next day. We finished building all the sides but one so we put it place because there was umbrella in the middle of the pit. Then we put the other side to together. Now the lower school is working on putting the gravel rock in the pit. Here is a Picture.