Makerspace at the Fulton School
In makerspace recently, I, and a few others, have been working on some woodcarving projects. I decided to make a couple spoons. I started by bringing in some of the wood that doc cut and I removed the bark with a chisel. After that…
For my Makerspace project I decided to make a wooden spoon. I decided to make a spoon because I saw a lot of other people making spoons and I thought it would be cool to make one. But I wanted my spoon to be…
I made a spoon using very arbitrary methods. I first had Doctor Urbano cut out a spoon sized block of cedar using the table saw. Then I traced out the shape of the spoon I wanted and started hacking away at it with a…
For mother’s day I made a puzzle for my mother. I used Inkscape to make the puzzle outline. Before cutting it out, I used the heat press to put the picture I wanted onto the wood. Once I let it sit overnight, I pit…
I made a clock, because i felt like it. to make this clock I first used the laser cutter to cutout a box and clock shape. Then I put all of the motors and wiring. after that I began the most difficult technology based…
This project is a continuation of building a battle bot from scratch. So I spent most of my time getting the right measurements for the wheel connectors for the Lego wheels and the stepper motors. After doing that I tried coding and fixing the…
I made a supper awesome chess board. First I started by making the design for the board, but lost it so my teacher was nice and gave me his design, but I had to make 2 boards one for me and one for him…
For this year, I have made a couple of projects. I am currently in the making of a Dyno for an RC car. First, a Dyno is a big machine that a car is placed on and strapped on. This machine measures your horsepower…
These are the red poker I made Firstly to make this I had to do research about poker chips. I found out that each poker chip is 3.9 inches and there are 300 in a set. I also learned that there 100 white pieces…
In makerspace this quarter, I have started to carve a spoon out of cedar. I chose a piece of wood that has a knot right in the middle of the bowl because it will look cool but unfortunately, that has made carving it out…
Recent Comments