Makerspace Project

For my Makerspace project this quarter I decided to make a wooden planter for some type of plant don’t know which plant I will plant in it. First I started out log and cut it half with a hammer and a chisel then I began carving it out with a chisel which took awhile so after a awhile I decided to use a drill to get a jumpstart to my progress and make it easier because it’s was hallowed out. I continue with the chisel and am still working on hallowing it out. I used a rasp on the sides to get the even and smooth. Eventually I will seal it with either epoxy or some sort of mineral oil or maybe treat the wood so it won’t rot if it’s outside. I hope to finish this project in the middle of the 2nd quarter if not the end of the 2nd quarter