Makerspace at the Fulton School
For mother’s day I made a puzzle for my mother. I used Inkscape to make the puzzle outline. Before cutting it out, I used the heat press to put the picture I wanted onto the wood. Once I let it sit overnight, I pit…
I made a clock, because i felt like it. to make this clock I first used the laser cutter to cutout a box and clock shape. Then I put all of the motors and wiring. after that I began the most difficult technology based…
This project is a continuation of building a battle bot from scratch. So I spent most of my time getting the right measurements for the wheel connectors for the Lego wheels and the stepper motors. After doing that I tried coding and fixing the…
I made a supper awesome chess board. First I started by making the design for the board, but lost it so my teacher was nice and gave me his design, but I had to make 2 boards one for me and one for him…
For this year, I have made a couple of projects. I am currently in the making of a Dyno for an RC car. First, a Dyno is a big machine that a car is placed on and strapped on. This machine measures your horsepower…
These are the red poker I made Firstly to make this I had to do research about poker chips. I found out that each poker chip is 3.9 inches and there are 300 in a set. I also learned that there 100 white pieces…
In makerspace this quarter, I have started to carve a spoon out of cedar. I chose a piece of wood that has a knot right in the middle of the bowl because it will look cool but unfortunately, that has made carving it out…
$$ A = \pi r^2 $$ to write equations like the one above use LaTeX formatting (LaTeX cheat sheet) with double dollar signs ($$) as delimiters. Thus the above equation would be: This is enabled using the MathJax-LaTeX plugin for WordPress.
Almost everybody knows of Doctor Urbano’s LED clock in the Makerspace and how blasphemous it is. So I’ve made a better one. Boasting 60, not 72, but 60 top-of-the-line AliExpress LEDs (definitely not made in a sweatshop), this clock doesn’t skip around every few…
I made a clock run by a Raspberry PiIt gets the current time over Wi-Fi and can print the arc length of the clock hands. I cut the frame out of wood on the laser cutter (The frame is approximately 13.25cm in diameter), I…
Recent Comments