Makerspace at the Fulton School
These are the red poker I made Firstly to make this I had to do research about poker chips. I found out that each poker chip is 3.9 inches and there are 300 in a set. I also learned that there 100 white pieces…
For the 2024 global interim I did a project I had been wanting to do for a while, a teardown display of an iPhone. Recently the Makerspace received a donation of several old Apple products, one of them being an iPhone 5. I spent…
For 2024’s WWT challenge we had to build an ethical AI for use in the classroom. My job was building the human input devices or HIDs, similar to a keyboard and mouse for a computer, these devices allow the teachers and students to control…
My first creation in Makerspace is this wooden penguin. Since couple of years ago, all my friends told me that I look like a penguin, so penguins became my favorite animal. Because I wanted to create something simple but cool for my first creation,…
In geometry we had to make 4 coasters with a formula or theorem on them. I decided to make mine with the definitions for Orthocenter, Circumcenter, Incenter, Centroid, Altitude, Perpendicular Bisector, Median, and Angle Bisector.
In geometry class we made birdhouses. I made mine out of the $3 wood from the makerspace. I made my birdhouse for the American Goldfinch which is 4-5 inches in length. I made a hole of the side which will open up to a…
So the first day I helped Micheal, Bryson get there 3D objects printed out on the 3D printer. The next day I bought a piece of wood so i could use the wood laser. I made the Kansas city chiefs logo, Star Wars logo,…
We just finished reading the play, Macbeth. I was going to make a model of the castle where Macbeth was from but there was a design mistake and didn’t fit together after the laser cut it out. We didn’t have enough time to go…
We were learning about the different characteristics of the periodic table in chemistry class. We had a project where we had to make a 3D periodic table of a characteristic of our choice and we could make it however we wanted. I choose ionization…
I wanted to learn how to program using the raspberry pi and learn how to solder using our new electronics bay. I started off with multiple different ideas but ended up making a LED light display. I took apart Christmas lights to get the…
Recent Comments