Makerspace at the Fulton School
This is the Animation ^ I started out with this concept sketch. From there, l used the app Clip Studio Paint Pro and eyeballed each frame. In the app the frames were called cells. I started with the outline of the head movements, which…
For the makerspace interim I helped Luke build his table. I helped him bring in materials, stain the wood, and the actual assembly of the table. I also helped dig a hole outside for a sand box John was making. Me and Adam did…
I learned a lot of stuff from laser cutting wood to wiring a motor. Hi my name is August and I built a remote control car. The first thing I did was get the materials for my project. The materials that I got were…
For the A.M. Makerspace interim, Miles, Liam, Peter, and I decided to make a potato cannon. We used a PVC tube, a grill ignitor, and hairspray. Once we glued the PVC tube together, Liam and peter drilled a hole at the bigger tube where…
Miles, Damien, Peter, and I created a potato cannon in the maker space for this interim. First, we took pvc pipes (60 mm diameter and 90 mm diameter) and connected them with pvc concreat and a connector. We then attached a cap to the…
First, I found the image on the internet. Then, I went to Corel and removed some of the details by pressing the smooth button. After that, i saved it as an svg and put the file into a folder. Then, I saved the folder…
During my time in Makerspace I built a potato cannon with Damien, Liam, and Miles. We first started out with designing the cannon in a process in which we oversimplified greatly, turns out we didn’t need any of this valves and tubes that we…
I made two Apoxsee discs In the Apoxsee I put two Polaroid pictures inside. I also put some leather beads in there. There was a lot of math to do for Apoxsee it had to set for 24 hours. I mix two-part Apoxsee resin…
Hi my name is Clara in maker space I made a couple 3-D printed items the first one I made was a 3-D snake it is gray I had to find the design on printable‘s then I download it then I sent it to…
During the week that I was in the makersspace, I made a number of wooden circles as well as a crown. On the first day, I knew I wanted to imprint one of my drawings onto something but I didn’t know what or onto…
Recent Comments