Makerspace at the Fulton School
This interim week I was working every morning in makerspace. In the beginning of the week, I was using the chop saw to cut the wood. After that, I file the wood, and I used the CNC machine to make a line on the…
We attached one of the sides to the top of the table and have all the lower parts of the table done and secured tightly.
I was tasked with coming up with my own idea for a project to work on for the week. I was having doubts about what I was going to do, but I eventually decided on taking all of the keys out of a keyboard…
To make my oar I started with a 2×4. I then cut the 2×4 into two pieces, the one I used was 5 and a half feet. I then ripped that piece of wood and used one of the two pieces for the shaft…
For this interim, I chose to continue working on the website for the ITEF grant. I was mainly focused on the appearance of the website and making it look nicer, as a good majority of the website is already fully functional. I made some…
We have finished cutting phase and are deep in construction almost done with the table I currently can not provide an image. When I can then I will post it separate to this post.
I’ve been struggling at getting information on war bases and a lot of sources aren’t very helpful to me and don’t give detailed information about the building process of a war base. Some of these sources only talk about their war base and why…
Project was a fail because the pad was too small. In tall grass areas, the propellers get caught on the grass. The project would’ve been a success if the pad was 2-3 inches wider.
It’s been a while and I’ve basically finished the board game I was working on. However I couldn’t figure out the rules that I got from the web making my board game creation a fail. Since the original creators rules of the WIP board…
Recent Comments